StockschraubeGewindestangeInnendichtung ZwischenleisteAussendichtungGewindemuffeZwischenleiste ZLHutmutterDichtscheibePressleisteOberleiste



The idea of clarity


Stabalux ZL-H for timber facades and roofs

Natural beauty

Stabalux Wood is characterized by the aesthetic and purposeful combination of the two materials wood and aluminium. The atmospheric warmth of wood on the inside combined with the resistance and lightness of aluminium on the outside. Technical advantages such as excellent insulating values, various gasket options and a large range of cappings, combine with the natural material of wood to form the optimal unit for architects and building owners.

Advantages of Stabalux Wood:

  • Best Uf-values extending to passive house compliance
  • G30 and F30 fire protection applications with same optics and no additional system accessories
  • Wood type and support structure design are freely selectable
  • Architects and planners design their own cross sections

With immediate effect Stabalux H is also available for delivery in system width 80 mm.

The new 80’s system as well as the 50’s and 60’s systems offers the market-proven TOP values for the CE marking.

Stabalux H 80 mm with Uf-values of up to 0,7 W/m²K is ideally suited for the highest requirements for heat insulation.

Construction details

System cross-sections

System Stabalux ZL-H

Download DWG | 981 kb

Performance data

Facade 5 mm high gasketFacade to 20° inclination;
inner gasket overlapping
Roof to 2° inclination
Systemwidth50, 60, 80 mm50, 60, 80 mm50, 60, 80 mm
Air permeability EN 12152AEAEAE
Water tightness EN 12154/ENV 13050static
RE 1650 Pa
250 Pa/750 Pa
RE 1650 Pa
250 Pa/750 Pa
RE 1350 Pa 2)
Resistance at wind load EN 13116Permissible load
Increased load
2,0 kN/m²
3,0 kN/m²
2,0 kN/m²
3,0 kN/m²
2,0 kN/m²
3,0 kN/m²
Impact resistance EN 14019I5/E5I5/E5Weight 50 kg
Height of drop 2,40 m

Suitable for passive house standard

System structureFacade Glass thickness
e.g. ZL-H-60120-44-15Uf = 0,61 W/(m²K) 1)44 mm

1) Without screw influence

2) In addition to the standard, the test was carried out with a volume of water of 3.4l / (m²min)