STABALUX Bamboo

The idea of clarity

Stabalux Bamboo for Facade and Roof

Naturally beautiful, atmospherically warm in healthy indoor climate, economical and versatile.

Characterized by the milled central groove and the direct screw connection, the Stabalux Bamboo system offers a completely coordinated program for glass facades and roofs in three system widths. Approved system connectors for curtain wall connections and certified glass supports allow economical and fast processing.

The simple integration of an insulating block achieves the highest heat protection and energy efficiency and enables the detection as a passive house suitable component in the curtain wall façade.

Features certified by tests and system pass are a guarantor for permanent functionality and basis for the CE marking. Inner seals, with one, two or three drainage levels, are pressed directly into the center groove and thus guided precisely. Whether blunt or overlapping, the same peak values ​​are achieved.

Systeme_Bambus

Construction details

System cross-sections
Systemschnitte Stabalux H

System cross-sections

System Stabalux Bamboo

Download DWG | 1183 kb

Roof connection

Dachanschluss mit Stufenglas

Roof connection

Implementation with stepped-edge glazing

Download DWG | 945 kb

Dachanschluss mit Deckleiste

Roof connection

Implementation with finished cover strips

Download DWG | 963 kb

Dachanschluss mit Regenrinne

Roof connection

Implementation with rain gutter

Download DWG | 970 kb

Ceiling connection

Ceiling connection

System Stabalux Bamboo

Download DWG | 946 kb

Intermediate ceiling

Connection in front of storey ceiling

Posts separated storey-wise

Download DWG | 956 kb

Wall connection

Firstanschluss an Wand

Ridge connection to wall

System Stabalux Bamboo

Download DWG | 886 kb

Horizontaler Wandanschluss an Wärmedämmverbundsystem

Horizontal wall connection

System Stabalux Bamboo

Download DWG | 784 kb

Base point

Mittelpfosten auf Bodenplatte (Riegelfahne durchlaufend)

Base point facade

Anchoring on base plate

Download DWG | 807 kb

Mittelpfosten auf Bodenplatte (Riegelfahne ausgeklinkt)

Base point facade

Anchoring on base plate)

Download DWG | 826 kb

Mittelpfosten vor Bodenplatte

Base point facade

Anchoring in front of base plate

Download DWG | 769 kb

Windows

Einsatzfenster

Insert window HUECK

Serie 1.0 IF

Download DWG | 1003 kb

Einsatzfenster

Insert window HUECK

Serie 1.0

Download DWG | 1008 kb

Roof window HUECK

Serie 85E

Download DWG | 931 kb

Einsatzfenster

Insert window Hahn

Series louvre windows S9 iVt-05

Download DWG | 969 kb

Doors

Einsatztür auswärts

Insert door outward HUECK

Serie 1.0

Download DWG | 1002 kb

Einsatztür einwärts

Insert door inward HUECK

Serie 1.0

Download DWG | 1002 kb

Performance data

Facade 5 mm high gasketFacade to 20° inclination;
inner gasket overlapping
Roof to 2° inclination
Systemwidth50, 60, 80 mm50, 60, 80 mm50, 60, 80 mm
Air permeability EN 12152AEAEAE
Water tightness EN 12154/ENV 13050static
dynamic
RE 1650 Pa
250 Pa/750 Pa
RE 1650 Pa
250 Pa/750 Pa
RE 1350 Pa*
Resistance at wind load EN 13116Permissible load
Increased load
2,0 kN/m²
3,0 kN/m²
2,0 kN/m²
3,0 kN/m²
2,0 kN/m²
3,0 kN/m²
Impact resistance EN 14019E5 / I5E5 / I5Weight 50 kg
Height of drop 2,40 m
Glas weights≤ 670 kg≤ 670 kg≤ 670 kg
Burglar resistance DIN EN 1627RC2RC2

*) In addition to the standard, the test was carried out with a volume of water of 3.4l / (m²min)